Guide

Apparel Quality Inspection (AQL) Explained for Importers

Short answer: AQL (Acceptance Quality Limit) is a statistical sampling method, based on ISO 2859-1, used to decide whether a production lot passes inspection. An inspector checks a random sample sized by the lot quantity and counts critical, major and minor defects against agreed limits — commonly 0 critical, 2.5 major and 4.0 minor for apparel.
In this article
  1. What AQL means
  2. Defect classes
  3. What a pre-shipment inspection checks
  4. When to inspect
  5. Tips for importers

When you import clothing, you rarely see every piece before it ships. AQL inspection is the industry’s standard way to decide — from a sample — whether an order meets your quality requirements.

What AQL means

AQL = Acceptance Quality Limit. It comes from sampling tables in the international standard ISO 2859-1 (and the older ANSI/ASQ Z1.4). The tables tell the inspector:

  • how many pieces to check, based on the size of the lot and the inspection level; and
  • the maximum number of defects allowed before the lot fails.

Defect classes

ClassMeaningApparel examplesCommon AQL
CriticalCould cause harm or breaks legal requirementsNeedle or sharp metal left in garment, loose small parts on childrenswear0 (none allowed)
MajorLikely to cause a return or failure in useOpen seams, holes, wrong size label, serious shade difference, measurements out of tolerance2.5
MinorCosmetic, unlikely to cause a returnLoose thread end, small mark that cleans off4.0

These are common choices, not rules — premium brands may set tighter limits.

What a pre-shipment inspection checks

  • Quantity packed and ready, and carton marks.
  • Style, colour and decoration against the approved sample.
  • Measurements against the spec sheet and tolerances.
  • Workmanship: seams, stitching, trims, prints and embroidery.
  • Labels: size, care, fibre content and barcodes.
  • Function checks: zips, snaps, drawcords; sometimes on-site tests such as a rub test or carton drop test.

When to inspect

  • During production (DUPRO): catches problems early, when they can still be fixed.
  • Pre-shipment (PSI / final random inspection): usually when at least 80% of the order is packed.

Tips for importers

  1. Agree the AQL levels and defect list in the purchase order.
  2. Give the inspector the approved sample and the tech pack.
  3. Decide in advance what happens if a lot fails — re-work and re-inspection, and who pays.
Sourcing for import or wholesale?Get catalogues, MOQs and a quotation for your market from our export team.
Request a Wholesale Quote

Frequently asked questions

What does AQL 2.5 mean?

It is the acceptance limit used for major defects in many apparel inspections. The sampling table then gives the exact number of major defects allowed for the sample size being inspected.

Who performs AQL inspections?

The buyer’s own QC staff, a third-party inspection company, or the factory’s QC team — many importers prefer an independent inspector for the final inspection.

Does passing AQL mean there are no defects?

No. AQL is a sampling method; a lot that passes can still contain a small number of defective pieces.

Sourcing for import or wholesale?

Get catalogues, MOQs and a quotation for your market from our export team.

Sources & further reading

  • ISO 2859-1 — Sampling procedures for inspection by attributes.
  • ANSI/ASQ Z1.4 — Sampling procedures and tables for inspection by attributes.